Pressure washer won’t start: Easy 8 steps to Fix
Pressure washer won’t start how to fix: A pressure washer is a kind of equipment that is very handy and useful in our home. We need different types of equipment to perform various kinds of tasks every day. If you have a pressure washer at your home, then you can find the usefulness of a pressure washer. It is a tool that can be used to clean pretty much everything and anything in our households. The device is also pretty much faster than using a bucket of water, hose, or brush. At the end of the day, the tool will make your day a lot easier and more comfortable.
But it will be a matter of thinking if your pressure washer is not working correctly. Even the machine is not starting, and then you can be in real trouble. You washed the machine properly, but still, it is not starting. Then you might think deeper to get a reliable solution of what happens real with your pressure washer.
Today, we are here to show you some possible reasons that you might ignore or forgot to do something during your machine starting time. It is better to try something thyself at home rather than going to a professional technician or having the decision to buy a new one.
Pressure washer won’t start How to fix
There could be some possible reasons that you even did not check or think that this type of reason can be the issue for failure to start. Let’s have a look at them.
1. Check the fuel
In this case, your very first task will be to check the fuel tank if you are running a gas-powered pressure washer. Your pressure machine’s fuel tank could be empty and clear, but you are trying to start for nothing without failure only. So, Make sure that you filled up your fuel tank of pressure washer properly and fully loaded before you try to start.
2. Fuel compatibility
You should check the fuel compatibility as well as the fuel availability in the fuel tank. Fuel compatibility means that whether you are using the specific fuel mix for the pressure washer of not. If you put into your fuel tank a different type of fuel that is compatible with another machine, then you won’t be able to start your pressure washer trying all day long. So you need to find the particular fuel components for your pressure washer and filled up the fuel tank with that fuel mix correctly.
3. Check cable
This term is applicable only when you are using an electric pressure washer. An electric pressure washer is connected by a wired cable to the source of power in order to gain its energy to run. If your power cable is damaged or leaked somewhere, then it could be the biggest reason for to failure of starting your pressure washer. Any damaged, leaked, or defected cable could fail to draw energy from the power source as well as it could be the reason for the short circuit. So, if you are using an electric pressure washer, then your first and foremost duty will be to check the cable properly before you go to start your machine.
4. Fuel pump connection
Your other duty should be included in your checking list is to examine that the fuel pump is connected well to the fuel pump. To say in detail, it is the fuel pump that leads from the fuel tank to the motor of the pressure washer to start the engine. So if there is any problem with the connection between the fuel pump and the fuel tank, it will resist starting your pressure washer. You might find leakage in your fuel pump. In this case, you will have to replace your fuel pump with a new one, or at least you need to seal the leakage to prevent leaking.
5. Check out the air
Another thing that can be responsible for not starting your pressure washer is the air into the water pump as well as the hose. Your pressure washer engine might be unable to start in this case. It is easy to fix at all. You just need to do is to keep trying to pump water through the pressure washer until the air has been evacuating totally from the hose. This process helped many people to start their pressure washer rather than going to a professional.
6. Spark plug
A defective spark plug can be the inner tool that prevents you from starting your pressure washer. If you have been using the spark plug for a long time, then it could lose its capabilities to run farther. Too much wore and tore spark plug will stop the engine from starting. All you have to do here is first clean your spark plug. There could be clogs fixate on the spark plug and preventing it from performing its activities. If their negative result comes out, then you should try to check the spark plug by a spark plug tester, whether it is still working or not.
If you find the negativity again, then we will suggest you buy a new one. It is just because that is not possible to fix the spark plug. You will find it easily in the market as well as cheaper to replace it altogether.
7. Air filter
A dirty air filter could be another reason to stop your pressure washer from starting. Actually, An air filter in a pressure washer plays a vital role in running the machine smoothly. It filtrates the air, typically go through the pumps that allow the engine and pumps to run smoother. If the air filter is clogged up with junks and debris, it will be unable to perform its duty. Therefore, the engine will lose the ability to suck as much air as needed to run your washer pressure appropriately.
Therefore, in order to get a resolution to this problem, the simplest way to deal with your issue is to clean the air filter thoroughly, which can easily be done by moving it under some warm water in the sink. Moreover, if you find your air filter too dirty or too damaged to run, you should change it altogether.
8. A Clogged Carburetor
If you are using a gas-powered pressure washer, then you might need to think deep. A piece of essential equipment indeed in your pressure washer is called a carburetor. A carburetor ensures the proportion of air and fuel mixture. If there is any mess or wrong in the air to fuel mixture, your pressure washer will not work correctly. It suggested that the fuel ratio of a pressure washer would be 12:1 and 15:1.
You must have to keep the air to fuel ratio within this dimension. And this process is regulated by the carburetor itself. If the carburetor is clogged up or get junked up thoroughly, it will lose its capabilities to work. As a result, you will have trouble burning the fuel properly. Moreover, the most significant impact will be the failure of starting your pressure washer.
After all, we have tried enough to make you aware of some common problems. Although you face trouble to start your machine, then you should consult a professional one.